Copyright 2011-2026 All rights reserved. No parts of this site may be used or copied without prior consent.
LEGS AND CASTERS
HOME / ABOUT US / PARTS / SERVICE / RETURN POLICY
LIFESTYLE SET HEIGHT LEGS
The Lifestyle™ bases are equipped with interchangeable legs. They are available in 8 set sizes (2 inch, 3 inch, 4 inch, 5 inch, 6 inch, 7 inch, 9 inch, 11 inch) and two adjustable sizes ( 6 to 10 inch and 8 to 13 inch). The different size legs allow you to use a different thickness of mattresses on each side of a dual king and they allow you to adjust the height of your bed to make it easier to get in and out of the bed. All of the legs except the 2" legs have plastic inserts on the end allowing them to be used on hardwood or tile floors. On all but the 2" and 11" legs and the adjustable legs, there is a hole for a push in caster in the 3', 4", 5", 6" and 7" legs. The 2" legs have a metal insert on the end to allow screw in casters to be used with them (they are too short for the push in casters). To use the 2" legs on hardwood or tile floors you must put the rubber caster cups under them. You can also get the two inch height by using the screw in casters without legs.
These legs are set in sets of 4. Many of the new imported bases use six legs. To replace all of them you would have to buy two sets of four.
The bolts on these legs (and the Ergo legs) are a metric size - M8x1.25. If you are not sure what size the bolt on your legs is, you can either go to a hardware store and buy a M8x1.25 bolt and see if it will screw into your base or bring a legs with you to the store and test the size in their thread gauges.I only have a limited number of these legs available and will not be ordering more as the ergo legs offer a better choice, they are in sections that can be added or removed to set the height instead of a set height leg.
2" WITH CASTER $ 150.00 $70 PER SET
3", 4", 5", 7" LEGS $ 100.00 $50 PER SET
9", 11" LEGS $ 110.00 $50 PER SET
________________________________________________________________________________________
LIFESTYLE ADJUSTABLE HEIGHT LEGS
These legs fit both the Lifestyle and Ergo bases. They have a push button that allows them to adjust in 1" increments. They have a plastic bottom to prevent damage on tile or wood floors. They will not accept a caster. They have a 2 1/4 inch diameter so they will not work with the rubber caster cups.
$130 SET OF 4
6"' - 10" LEGS
8"' - 13" LEGS
________________________________________________________________________________________
LIFESTYLE LEGS
ERGO LEGS
These legs have a M8 x 1.25 thread, like the above Lifestyle legs. They come in different length sections so height is adjustable without having to buy new legs.
They come in a set of four. Each leg consist of three pieces, each piece is three inches. They can be screwed together to make a three, six or nine inch leg. The threads on them are M8X1.25. They do not have a hole for a caster. The plastic washers go between each piece and on the top of the upper piece.
3" + 3" + 3" = 9"
These legs come in a set of four. Each leg consist of two pieces. One piece is three inches. The other piece is six inches. They can be screwed together to make a nine inch leg. The threads on them are M8X1.25. The bottom of the three inch sections has a threaded hole for either the six inch leg, an included felt bottom glide or a caster. The six inch section does not have a hole for a caster, it has a plastic glide. The plastic washers go between each piece and on the top of the upper piece.
3" + 6" = 9"
$ 125
B8740
B9607
2000085
2001728
________________________________________________________________________________________
These legs are for Lifestyle and Ergo bases. They come in a set of six. Each leg consist of two pieces. One piece is four inches and the second piece is seven inches. They can be used separately or screwed together to make an eleven inch leg. The threads on them are M8X1.25. They have a plastic bottom with recessed threads so they won't damage tile or laminate floors. I do have screw in casters that can be screwed into the bottom of the leg. They will add 2 1/4 inches of height to the leg.
These have a M8x1.25 thread and will fit either the Lifestyle bases or the Ergo bases. If you only need 2" of lift and can't use casters then this is what I recommend you use. Where the 2" Lifestyle black metal legs have a threaded metal plate on the bottom that can damage tile or hardwood floors, the wide plastic glide on these legs will not cause any damage. These legs are also available in 9". They are only available in sets of 4.
$ 120 SET OF 6
4" + 7" = 11"
2" STAINLESS STEEL GLIDE
$ 110
20005292000532
B9326
________________________________________________________________________________________
These legs and casters sets are available in two heights. The first one consist of a 2 inch leg with a 3 inch screw in caster for a total height of 5 inches. The second one consist of a 6 inch leg with a 3 inch screw in caster for a total height of 9 inches. The legs themselves are 2 1/4 inches in diameter. You could use them without the casters but you will need to put a coaster of some kind under them to prevent damage to the floor. The Rubber caster cups I have are not wide enough to fit these legs. They have the M8x1.25 threads.
$165 INCLUDES CASTER
$165
INCLUDES CASTER
2000526
2000528
LEGS FOR OTHER BRANDS
ERGO PEDIC LEGS
These legs are 12 inches tall and 2 inches in diameter. The thread is a metric M10X1.5. They have a solid plastic glide on the bottom without a hole for a caster. These legs have a 2 inch diameter and can be used with the rubber caster cups. Available in set of 6.
12" SET HEIGHT
$48
Each legs consist of two 3 inch pieces plus a 6 inch piece that, when assembles, equal 12 inches. The thread is a metric M10X1.5. The 6 inch piece has a solid plastic glide on the bottom without a hole for a caster. These legs have a dimeter of 2 inches and can be used with the rubber caster cups
3" + 3" + 6" = 12"
$ 60
________________________________________________________________________________________
These legs are 8 inches tall and 2 1/4 inches in diameter. The thread is a standard 7/16 thread. They have a solid plastic glide on the bottom without a hole for a caster. These legs are too wide to be used with the rubber caster cups. I have one set of four.
8" SET HEIGHT LEGS
$ 48
I have one used set of these legs. They are 6" tall with a small plastic bump/glide on the bottom. The thread is metric M8 x 1.25 and is 1.5" long. In the photo they look black but they are actualy dark brown. You could probably sand and stain them any color you want. I have one set of 4 and can't order more when they are gone.
$ 45
6" TAPERED WOOD LEGS
________________________________________________________________________________________
TEMPUR-PREMIER (OLD STYLE)DISCONTINUED
These legs were used on the Tempur-Pedic Premier bases. They came in sets of four. They are a set height of 12".
These legs were used on the Tempur-Pedic Premier bases. They came in sets of four. The black bumper on the bottom is adjustable up to 1" to help level your bed if it is on uneven surface such as Mexican pavers.
THESE LEGS HAD A THREAD SIZE OF 1/2 X 13
REPLACEMENT CASTERS
We carry replacement locking wheels for most older beds. We have both the push in wheels and screw in wheels. There were two sizes of stems on the push in wheels. The smaller size stem (3/8 ") was only used on the Maxwell Bases. The larger size (7/16") was used on most other bases. The smaller casters will add 2 1/4" to the height of the bed. The large caster (2000533) will add 3 1/4" to the height of the bed. The screw in wheels are for use on Lifestyle bases and some Ergo bases when the legs are removed.. We also carry the screw in glides for the lifestyle bases. The caster inserts fit the older Electropedic bases.
PUSH IN WHEELS $ 85.00 SET OF 4 ONLY (either size)
SCREW IN WHEELS 2" $ 85.00 SET OF 4 ONLY (only for Lifestyle/Ergo bases)
SCREW IN WHEELS 3" $ 150.00 SET OF 4 ONLY (only for Lifestyle/Ergo bases)PLASTIC INSERTS $ 2 EACH
These are the plastic inserts used in the old Electropedic bases. They push into the frame and the caster pushes into them. They have an outside diameter of 5/8", an inside diameter of 7/16" and the insert hole is 1.75" deep.
These legs are 6 inches tall and 2 inches in diameter. The thread is a metric M10X1.5. They have a solid plastic glide on the bottom without a hole for a caster. These legs have a 2 inch diameter and can be used with the rubber caster cups. one set of 4 available.
$ 25
6" SET HEIGHT