Copyright 2011-2026 All rights reserved. No parts of this site may be used or copied without prior consent.
LIFT ARM AND GLIDE TRACK ROLLERS
HOME / ABOUT US / PARTS / SERVICE / RETURN POLICY
These generic rollers either attach to the ends of the head and foot lift arms or enable the bed to glide smoothly along the tracks of wall hugger-style bases. While measurements are approximate, the hole diameter typically holds greater importance than the overall diameter. Providing a manufacturer’s name and model number can help ensure accurate replacement..
________________________________________________________________________________________
Approximately 1 7/8 inches in diameter. The hole is approximately 5/16 inch in diameter. Each side of the roller is identicle.
Approximately 1 7/8 inches in diameter. The hole is approximately 3/8 inch in diameter. Each side of the roller is identicle.
Approximately 1 7/8 inches in diameter. The hole is approximately 1/4 inch in diameter. One side of the rover is smooth and the other side has ribs.
This roller is used in the track of a Lifestyle Wall hugger base. The smaller side is approximately 2 inches in diameter and the larger side is approximately 2 1/4 inches in diameter.. The hole is approximately 1/2 inch in diameter.
This roller is used in the track of an unknown brand wall hugger base. It is approximately 1 1/2 inches in diameter. The hole is approximately 1/4 inch in diameter. Each roller is actually 2 pieces.
I saved this roller off an unknown brand base. I have 4 in stock. The roller is approximtely 2 inches in diameter and the hole is approximately 3/8 inches in diameter.
ALL ROLLERS ARE $ 15 EACH