adjustablebedparts.com
  • Home
  • ADJUSTABLE BED PARTS INDEX
  • IN HOME SERVICE
  • ABOUT US
  • Testimonials
  • Contact Us
  • RETURN POLICY
  • USB PORTS
760.773.2337

Copyright 2011-2026 All rights reserved. No parts of this site may be used or copied without prior consent.

SIDE RAILS
HOME / ABOUT US / PARTS / SERVICE / RETURN POLICY
NOTE If you are mounting these on a bed in an assisted living facility, check with management to be sure they are allowed.
GF ADJUSTABLE HEIGHT SIDE RAILS
image
The GF adjustable height side rail can be mounted on most brands of beds, both old and new. It can mount on top of the deck or underneath. Although it is usually mounted on the side of the bed near the top half, it can be mounted anywhere on the side. Although it is mostly designed for keeping people from rolling out of the bed, it is most often used to hold onto as people get in and out of the bed. The mounting bracket is small enough to mount anywhere on the side of the bed. You can put one on one side at the head, both sides at the head or both sides at the head and foot. Caution must be used if it is installed on the side at the foot of the bed as the person in the bed will need an assistant to lower it before they can get . This may present a safety issue if the person needs to get out of bed in an emergency
image
This is the mounting bracket. The main bar slides into this bracket. The rail height is adjustable. There are holes in the side of the mail bar that the white pin slides into to adjust the height. You can also completely remove the bar by lifting it out of the bracket. This bracket mounts on the top of the deck of newer bases and underneath the deck on older bases. There are 8 mounting hole. All should be used if possible, with four of the bolts going into t-nuts if possible. The other four can be lag screws.
image
This is a T-Nut assembly.
image
image
This is a picture of the half side rail mounted on newer type base. It mounts on the top of the base. You must use smooth headed bolts when you mount it on this type of bed. This is the easiest type of base to mount a half side rail to. The T-Nuts and bolts can be reached without loosening up any of the fabric and you can use lag screws in the other bolt holes of the mounting bracket.
This is a picture of the half side rail mounted on a traditional base. It mounts to the underside of the wood platform. You will need to pop the material loose under the deck of the base and install auto install the T-nuts in the top of the base. You then staple the material back and install the side rail. You can use a bolt and locking nut but you have to leave the fabric loose while you tighten the nuts. The fabric will then be bunched up around the bracket when you staple it back.
ONE INDIVIDUAL RAIL$450
SET OF TWO RAILS$600INSTALLATION EXTRA
SB SIDE RAIL
SB side rails only mount on both older and newer style bases. The here are only four bolts holding each rail on so you will definitely need to use T-Nuts to mount them.
image
image
• Warning - Do not use the Support Rail without the cover installed. Doing so increases pinch points and entrapment hazards.
ONE INDIVIDUAL RAIL $150 SET OF TWO RAILS $200 INSTALLATION EXTRA
DH SIDE RAIL
This rail is used mostly to assist with getting in and out of the bed. They re sold individually, not in sets. They are designed for a specific base but can be used on many other bases. Please study the picture the mounting plate to determine if it will fit on your base. They come with a"bolster" that fits on the opposite side of the bed from the rail. This prevents the mattress from scooting of the side of the base.
image
image
image
image
image
MATTRESS BOLSTER
MOUNTING PLATE
MOUNTING PLATE INSTALLED
$200INCLUDESONE BARONE BOLSTER

We use cookies to enable essential functionality on our website and analyze website traffic. For more information, read our Cookies and Privacy Policy.

Your Cookie Settings

We use cookies to enable essential functionality on our website and analyze website traffic. For more information, read our Cookies and Privacy Policy.

Cookie Categories
Essential

These cookies are strictly necessary to provide you with services available through our websites.

Analytics

These cookies collect information that is used in aggregate and in an anonymized form to help us understand how our website is being used and how effectively our site is performing.