Copyright 2011-2026 All rights reserved. No parts of this site may be used or copied without prior consent.
SYNC CABLES
HOME / ABOUT US / PARTS / SERVICE / RETURN POLICY
There are two ways to make two separate bases operate at the same time. You can program both bases to one control but there is no guarantee that they will respond to the signal at the exact same time. Also, some brands of bases will not allow a hand control to be programmed to more than one base at a time. The more reliable way is to use a "Sync Cable". Each end of a sync cable plugs into the control box under each base. There are two advantages to this method:
1. Each base will still have a hand control, either a plug in one or a wireless one. The beds will operate when either one of the control is used so either occupant can control the bed, not just one of them.
2. When a button is pushed on either control, a signal is sent to each base at the same time, allowing them to start moving at pretty close to the same exact time.
Different brands of control boxes use different sync cables. The plugs are different on each type of cable.
OKIN SYNC CABLE, DOUBLE PLUG
This cable is for use on Okin Control Systems. Even though it looks like the plugs on a wired hand wand, it will not function the same as an Okin Y Cable if you try to use it on an Okimat 2 motor. The extra plug on each end enables various options, such as under bed lights, to be plugged in.
$ 75
612
________________________________________________________________________________________
RJ12 SYNC CABLE
This cable is used on okin boxes where the sync cable plug looks like a six conductor phone jack. The CB1220 control unit and the CB3332 control unit are examples the boxes it will work on. They are six feet long but I have longer ones available. I have included an example of the type of port that this cord would plug into.
This cable is used on okin boxes where the sync cable plug looks like a phone jack. The CB1220 control unit and the CB3332 control unit are examples the boxes it will work on. They are six feet long but I have longer ones available. On the picture on the right below, the small square port is the port it fits into. Although this looks similar to t six conductor phone cable, the wiring may be in a different order.
$ 40
________________________________________________________________________________________
KEESON SYNC CABLE
This is the cable for connecting two Keeson Control Boxes together. It has a square 4 prong micro plug on each end.
$ 100
Keeson control boxes have replace the Okin control boxes on many bases as an upgrade. If you have two beds and one has an Okin control system and the other has a Keeson control system, you can use this adapter to connect them together to operate as one. You will still need the Keeson sync cable.
$ 25
8001027
8001322
________________________________________________________________________________________
MOTOSLEEP SYNC CABLE
This cord enables you to sync two HHC/Motosleep control units together. It will fit the CB11, CB18, and CB2 control units.
$ 35
________________________________________________________________________________________
TEMPUR PREMIER/PLUS LOGIC DATA SYNC CABLE
This cable is for the Tempur0Pedic Premier and Tempur Plus Logic Data control units.
$ 20
________________________________________________________________________________________