Copyright 2011-2026 All rights reserved. No parts of this site may be used or copied without prior consent.
MASSAGE MOTORS
HOME / ABOUT US / PARTS / SERVICE / RETURN POLICY
There are two main types of massage motors:
1. 110 volt a/c motors
2. low voltage d/c motorsCLICK HERE TO SEE MASSAGE MOTOR ACCESSORIES
The 110 volt a/c motors are found mainly on the older beds. They have a thick round cord coming from them with a small square 4 pin connector on the end designed to fit the Lifestyle bases. You may have to cut the end off of your old massage motor and splice it onto the new one. These motors can last up to 10 years with daily use. There are two types of 110 volt massage motors. Click here for more information.
110 VOLT MASSAGE MOTORS
$ 100 EACH
LOW VOLTAGE MASSAGE MOTORS
________________________________________________________________________________________
LIFESTYLE 24 VOLT DC MOTORS
The 24 volt D/C motors are used on beds with okimat motors. They have a thin round cord coming from them with a flat 2 pin micro connector on the end. They came in two versions, depending on the age of the bed but they are interchangeable. They both have the same plug on the end, the black 2 pin micro plug pictured to the right. If your old massage motors do not have this plug, then this massage motor will not fit on your bed. There are no jumpers.
These motors were mounted using these mounting pads.$ 20 set of 4
CAUTION: Be sure to fully depress the clip on the massage motor plug when you unplug it from the Oki motor. If you do not fully depress the clip you will pull the socket out of the side of the Oki motor. In the picture below right, the plug on the left has the socket attached.
$ 100
0064
OKIN MASSAGE MOTOR TYPE 1
These are 24 volt motors and have a flat 2 prong plug. They are used in the CU258/358 control boxes. The RPM rating may vary depending on what they have in stock. The rubber mounting gaskets are listed below. Twin xl bases usually had 1 or two motors. Queen and king bases can have up to 4 motors and require the massage motor splitter listed below.
$ 100
OKIN MASSAGE MOTOR TYPE 2
This massage motor is for use with assorted Okin control units. My current supplier sells these in a foam encasement used on their bass. If your bed does not use this encasement, you can take the massage motor out of it. Please note the plug has 3 pins. Some versions of this motor only have 2 pins.
0044
$ 125
HANKSCRAFT MASSAGE MOTOR
2310105
This 24 volt DC massage motor is similar to the Hankscraft motor used on the Okimat motor but has a different plug. It is often used on the older Prodigy bases.
$ 90
RICHMAT MASSAGE MOTORS
Richmat massage motors are 24 volt. They come in three plug configurations. They are a straight round plug, a 90 degree round plug, and a straight oval plug. They are not interchangeable.
I have a limited supply of the 90 degree round plug and the straight oval plug. They are still at the old price. I am still able to order the motor with the straight round plug.
Confirm what type of plug you have before ordering.
RICHMAT ROUND MASSAGE MOTOR PLUGS
RICHMAT OVAL MASSAGE MOTOR PLUGS
90 degree round plug motor $60
Oval straight plug motor $60
Straight round plug motor $100
HHC/MOTOSLEEP MASSAGE MOTORS
This is the 24 volt DC massage motor used on many Motosleep bases. The plugs are the same at the head and foot but different color so you know where to plug them in.
$ 75
MS02K
LINAK 6 PIN AND 6 PIN MASSAGE MOTOR
These low voltage motors work on the Linak control boxes with six pin plugs. There is no difference between the head and the foot motor.
These low voltage motors work on the Linak control boxes with two pin plugs. There is no difference between the head and the foot motor.
$ 90